Dynapac CA134 - Maintenance Schedule Overview

Operating instructions - Summary
ICA134-3EN2.pdf2012-04-13
Operating instructions - Summary
1. Follow the SAFETY INSTRUCTIONS specified in the Safety Manual.1. Follow the SAFETY INSTRUCTIONS specified in the Safety Manual.
2. Make sure that all instructions in the MAINTENANCE section are followed.2. Make sure that all instructions in the MAINTENANCE section are followed.
3. Turn the master switch to the ON position.3. Turn the master switch to the ON position.
4. Move the forward/reverse lever to the NEUTRAL position.4. Move the forward/reverse lever to the NEUTRAL position.
5. Set the vibration switch in position 0.5. Set the vibration switch in position 0.
6. Set the engine speed control to idle (900 rpm).6. Set the engine speed control to idle (900 rpm).
7. Set the emergency stop in the pulled out position.7. Set the emergency stop in the pulled out position.
8. Start the engine and allow it to warm up.8. Start the engine and allow it to warm up.
9. Set the engine speed control to the operating position (2870 rpm).9. Set the engine speed control to the operating position (2870 rpm).
10. Drive the roller. Operate the forward/reverse lever with care.10. Drive the roller. Operate the forward/reverse lever with care.
11. Test the brakes. Remember that the braking distance will be longer if the
roller is cold.
11. Test the brakes. Remember that the braking distance will be longer if the
roller is cold.
12. Use vibration only when the roller is in motion.12. Use vibration only when the roller is in motion.
13. IN AN EMERGENCY:
- Press the emergency stop
- Hold the steering wheel firmly.
- Brace yourself for a sudden stop.
13. IN AN EMERGENCY:
- Press the emergency stop
- Hold the steering wheel firmly.
- Brace yourself for a sudden stop.
14. When parking:
- Press the emergency stop.
- Chock the drum and wheels.
14. When parking:
- Press the emergency stop.
- Chock the drum and wheels.
15. When lifting: - Refer to the relevant section in the Instruction Manual.15. When lifting: - Refer to the relevant section in the Instruction Manual.
16. When towing: - Refer to the relevant section in the Instruction Manual.16. When towing: - Refer to the relevant section in the Instruction Manual.
17. When transporting: - Refer to the relevant section in the Instruction Manual.17. When transporting: - Refer to the relevant section in the Instruction Manual.
18. When recovering - Refer to the relevant section in the Instruction Manual.18. When recovering - Refer to the relevant section in the Instruction Manual.
59