Dynapac CA134 - Page 72

Maintenance - Lubricants and symbols
ICA134-3EN2.pdf 2012-04-13
DYNAPACDYNAPAC
ENGINE OIL Air temperature -15°C - +50°C
(5°F-122°F)
Shell Rimula R4 L
15W-40, API CH-4 or
equivalent.
ENGINE OIL Air temperature -15°C - +50°C
(5°F-122°F)
Shell Rimula R4 L
15W-40, API CH-4 or
equivalent.
HYDRAULIC FLUID Air temperature -15°C - +50°C
(5°F-104°F)
Shell Tellus S2 V68 or
equivalent.
HYDRAULIC FLUID Air temperature -15°C - +50°C
(5°F-104°F)
Shell Tellus S2 V68 or
equivalent.
Air temperature over +50°C
(104°F)
Shell Tellus S2 V100 or
equivalent.
Air temperature over +50°C
(104°F)
Shell Tellus S2 V100 or
equivalent.
BIOLOGICAL
HYDRAULIC FLUID,
PANOLIN
When it leaves the factory, the
machine may be filled with
biologically degradable fluid.
The same type of fluid must be
used when changing or topping
up.
PANOLIN HLP Synth 46
(www.panolin.com)
BIOLOGICAL
HYDRAULIC FLUID,
PANOLIN
When it leaves the factory, the
machine may be filled with
biologically degradable fluid.
The same type of fluid must be
used when changing or topping
up.
PANOLIN HLP Synth 46
(www.panolin.com)
BIOLOGICAL
HYDRAULIC FLUID
When it leaves the factory, the
machine may be filled with
biologically degradable fluid.
The same type of fluid must be
used when changing or topping
up.
BP Biohyd SE-S46BIOLOGICAL
HYDRAULIC FLUID
When it leaves the factory, the
machine may be filled with
biologically degradable fluid.
The same type of fluid must be
used when changing or topping
up.
BP Biohyd SE-S46
DRUM OIL Air temp. -15°C - +40°C
(5°F-104°F)
Shell Spirax S3 AX
80W/90, API GL-5 or
equivalent.
Dynapac Gear Oil 300,
P/N 4812030756 (5 litres),
P/N 4812030117 (20 litres),
P/N 4812031574 (209
litres)
DRUM OIL Air temp. -15°C - +40°C
(5°F-104°F)
Shell Spirax S3 AX
80W/90, API GL-5 or
equivalent.
Dynapac Gear Oil 300,
P/N 4812030756 (5 litres),
P/N 4812030117 (20 litres),
P/N 4812031574 (209
litres)
Air temp. 0°C (32°F) - above
+40°C (104°F)
Shell Spirax AX
85W/140, API GL-5 or
equivalent.
Air temp. 0°C (32°F) - above
+40°C (104°F)
Shell Spirax AX
85W/140, API GL-5 or
equivalent.
GREASE SKF LGHB2
(NLGI-Klass 2) or
equivalent for the
articulated joint.
Dynapac Roller Grease
(0.4kg),
P/N 4812030096
GREASE SKF LGHB2
(NLGI-Klass 2) or
equivalent for the
articulated joint.
Dynapac Roller Grease
(0.4kg),
P/N 4812030096
Shell Retinax LX2 or
equivalent for other
grease points.
Shell Retinax LX2 or
equivalent for other
grease points.
FUEL See engine manual. - -FUEL See engine manual. - -
TRANSMISSION OIL Air temperature -15°C - +40°C
(5°F-104°F)
Shell Spirax S3 AX
80W/90, API GL-5 or
equivalent
Dynapac Gear Oil 300,
P/N 4812030756 (5 litres),
P/N 4812030117 (20 litres),
P/N 4812031574 (209
litres)
TRANSMISSION OIL Air temperature -15°C - +40°C
(5°F-104°F)
Shell Spirax S3 AX
80W/90, API GL-5 or
equivalent
Dynapac Gear Oil 300,
P/N 4812030756 (5 litres),
P/N 4812030117 (20 litres),
P/N 4812031574 (209
litres)
Air temperature 0°C (32°F) -
above +40°C (104°F)
Shell Spirax AX
85W/140, API GL-5 or
equivalent.
Air temperature 0°C (32°F) -
above +40°C (104°F)
Shell Spirax AX
85W/140, API GL-5 or
equivalent.
COOLANT Anti-freeze protection down to
about -37°C (-34.6°F)
GlycoShell/Carcoolant
774C or equivalent,
(mixed 50/50 with water)
COOLANT Anti-freeze protection down to
about -37°C (-34.6°F)
GlycoShell/Carcoolant
774C or equivalent,
(mixed 50/50 with water)
Other fuel and lubricants are required when
operating in areas with extremely high or
extremely low ambient temperatures. See the
‘Special instructions’ chapter, or consult
Dynapac.
Other fuel and lubricants are required when
operating in areas with extremely high or
extremely low ambient temperatures. See the
‘Special instructions’ chapter, or consult
Dynapac.
64