SLX9000 Adjustable Frequency Drives User Manual
MN04003020E
For more information visit: www.eaton.com 3-7
January 2009
Table 3-5: Mounting Procedure (Continued)
4 Re-install the cable cover. Mount the
cable clamps with the three M4x16
screws as shown. Note that the
location of the grounding bar in MF6,
FR7 and FR8 is different from what is
shown in the picture.
5 Place the rubber grommets in the
openings as shown.
6 Fix the cable entry gland to the frame
of the drive with the five M4x10
screws. Close the cover of the drive.
To Next Page
Loading...
