Patient Monitor User Manual Introduction
- 17 -
RESP: Respiration Rate (RR)
Respiration Waveform
SpO
2
: Oxygen Saturation (SpO
2
), Pulse Rate (PR)
SpO
2
Plethysmogram
NIBP: Systolic Pressure (SYS), Diastolic Pressure (DIA), Mean Pressure (MAP), PR (NIBP)
TEMP: Channel-1 Temperature (T1), Channel-2 Temperature (T2),
Temperature Difference between two channels (TD)
IBP: Channel-1 SYS, DIA, MAP
Channel-2 SYS, DIA, MAP
Dual-IBP waveforms
CO
2
: End Tidal CO
2
(EtCO
2
)
Fraction of inspired carbon dioxide
(FiCO
2
)
Air Way Respiration Rate (AwRR)
CO
2
waveform
The monitor provides extensive functions such as visual and audible alarms, storage for trend
data, NIBP measurements, alarm events, drug dose calculation, and so on.
3.2 Screen Display
The monitor is equipped with a high-resolution multicolor TFT LCD screen. The patient
parameters, waveforms, alarm messages, bed number, time, monitor status and other data can be
reflected from the screen.
The screen is divided into three areas:
1 Information Area ① ④;
2 Waveform Area ②;
3 Parameter Area ③.
To Next Page
Loading...
Need help?
General
