EasyManuals Logo

EDAN M8 Series User Manual

EDAN M8 Series
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
Patient Monitor User Manual Intended Use and Safety Guidance
- 7 -
CAUTION
9 Avoid liquid splash and excessive temperature. The temperature must be kept
between 0 C and 40 C while working. And it should be kept between -20 C and 55
C during transportation and storage.
10 A potential hazard may exist if different alarm presets are used for the same or
similar equipment in any single area.
11 Protect the device against mechanical damage resulting from falls, impacts, and
vibration.
12 A ventilated environment is required for monitor installation. Do not block up the
ventilation grille at the back of the device.
13 Poor connection might be caused by frequently plugging and unplugging the power
cord. Check the power cord regularly and replace it in time.
14 Route all cables carefully to avoid possible entanglement, apnea, or electrical
interference. For the device mounted over the patient, sufficient precautionary
measures should be taken to prevent it from falling on the patient.
15 In normal use, the operator shall stand in front of the monitor.
NOTE:
1 The monitor can only be used on one patient at a time.
2 If the monitor gets damp, put it in dry circumstance to dry it until it can work normally.
If liquid pours on the monitor, please contact the service personnel of the
manufacturer.
3 The manufacturer suggests that the lifetime of the monitor is 5 years.
4 This monitor is not a device for treatment purpose.
5 The pictures and interfaces in this manual are for reference only.
6 The materials with which the patient or any other person can come into contact
conform to the standard of EN ISO 10993-1: 2013.
7 If the device is discolored or damaged, then discontinue use of the device.
8 Regular preventive maintenance should be carried out every two years. You are
responsible for any requirements specific to your country.
9 When there's measurement beyond range, invalid measurement or no measurement
value, it will display ---.
10 When deploying the network of the monitor and MFM-CMS, it is recommended to
isolate the network and the Intranet system of the hospital by using VLAN so as to
ensure the network security.
1.2.7 Protecting Personal Information
Protecting personal health information is a major component of security strategy. To protect the
personal information and ensure the proper device performance, the user should take necessary

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EDAN M8 Series and is the answer not in the manual?

EDAN M8 Series Specifications

General IconGeneral
BrandEDAN
ModelM8 Series
CategoryMeasuring Instruments
LanguageEnglish

Related product manuals