Patient Monitor User Manual System Menu
- 42 -
Figure 4-22 Confirm to delete
After deleting successfully, it indicates DELETE SUCCESS!
NOTE:
The data of the current monitoring patient ID can not be deleted.
If the data has not been saved successfully because of the power supply off or USB storage
failure, when the users queries data by SELECT DATA, the prompt pops up "INVALID DATA".
If the user wants to query or delete data before selecting data, the prompt will pop up “please
choose data”
If the USB storage is full, the monitor can’t store data and it indicates NO SPACE IN USB
STORAGE on the screen; the user needs to manually delete some data to continue.
NOTE:
1 Data store function can be set to on or off in FACTORY MAINTAIN by the
manufacturer or the representative permitted by the manufacturer.
2 Remove USB disc before deleting may damage the USB storage or loss data.
4.16 Wireless Network with Router (Optional)
The monitor can construct wireless network with router. Our company arranges the qualified
engineers to install and set the wireless network for the user and test the corresponding performance.
For details, please refer to Patient Monitor Wireless Network Installation Guide.
NOTE:
1 Be aware that some network-based functions may be limited for monitors on wireless
networks in comparison with those on wired networks.
2 The obstacle may interfere with data transmission and even cause data loss.
3 Use the wireless device recommended by the manufacturer, otherwise some
exceptional situations such as frequent network disconnection may occur on the
monitor.
To Next Page
Loading...
Need help?
General
