Patient Monitor User Manual Recording (Optional)
- 74 -
Notes on Recording
Recording types:
Real time Report
Periodic Report
Para Alarm Report
Titration Table
Arrhythmia Report
Freeze Wave Report
Trend graph
Trend table
Para Alarm Review
NIBP Test Review
Patient bed number, name, sex, height, weight, date of birth, admission date
Parameter name and value
Recording time
Waveform name
Waveform scale (for ECG waveform)
ECG lead, scale, filter mode, (if there are ECG waveforms, they will be printed out within
the first second or when changing the lead, gain and filter mode during real-time recording.)
IBP scale (the first second of IBP waveform)
CO
2
scale (the first second of CO
2
waveform)
Date and time.
9.3 Recording Startup
You can start the recording in the following ways:
Continual real-time recording
Press the RECORD button to start/stop the recording.
8 second real-time
recording
Press the RECORD button to start recording. It will
automatically stop in 8 seconds.
Record the three waveforms selected in RECORD menu
according to the setup time interval in RECORD menu. It
will automatically stop in 8 seconds.
When alarm recording is set to ON, it automatically starts
when alarm occurs.
Access the TREND GRAPH menu, and then press the
RECORD button to start recording.
To Next Page
Loading...
Need help?
General
