C
HAPTER
38
| Multicast Filtering Commands
IGMP Snooping
– 1207 –
◆ This command applies when the switch is serving as the querier
(page 1195), or as a proxy host when IGMP snooping proxy reporting is
enabled (page 1194).
EXAMPLE
Console(config)#ip igmp snooping vlan 1 query-interval 150
Console(config)#
ip igmp
snooping vlan
query-resp-intvl
This command configures the maximum time the system waits for a
response to general queries. Use the no form to restore the default.
SYNTAX
ip igmp snooping vlan vlan-id query-resp-intvl interval
no ip igmp snooping vlan vlan-id query-resp-intvl
vlan-id - VLAN ID (Range: 1-4094)
interval - The maximum time the system waits for a response to
general queries. (Range: 10-31740 tenths of a second)
DEFAULT SETTING
100 (10 seconds)
COMMAND MODE
Global Configuration
COMMAND USAGE
This command applies when the switch is serving as the querier
(page 1195), or as a proxy host when IGMP snooping proxy reporting is
enabled (page 1194).
EXAMPLE
Console(config)#ip igmp snooping vlan 1 query-resp-intvl 20
Console(config)#
To Next Page
Loading...
