C
HAPTER
38
| Multicast Filtering Commands
MLD Filtering and Throttling
– 1245 –
show ipv6 mld
query-drop
This command shows if the specified interface is configured to drop MLD
query packets.
SYNTAX
show ipv6 mld throttle interface [interface]
interface
ethernet unit/port
unit - Stack unit. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
COMMAND USAGE
Using this command without specifying an interface displays all interfaces.
EXAMPLE
Console#show ipv6 mld query-drop interface ethernet 1/1
Ethernet 1/1: Enabled
Console#
show ipv6 mld
throttle interface
This command displays the interface settings for MLD throttling.
SYNTAX
show ipv6 mld throttle interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
DEFAULT SETTING
None
COMMAND MODE
Privileged Exec
To Next Page
Loading...
Need help?
General
