Edge EDGE-3270 - Cooling Circuit Temperature Adjustment

117
support@edgeovens.com
Technical Support: +1 (724) 628 3050
SERVICE
COOLING CIRCUIT TEMPERATURE ADJUSTMENT
The oven is equipped with a cool down circuit. Once shut down of the oven has been initiated, the MAIN
BLOWER FAN and CONTROL SYSTEM will remain ON until the oven has cooled to 225°F (107°C).
Cool down circuit temperature adjustments must be authorized by EDGE. Raising the COOLING circuit shut off
temperature can lead to heat related damage to oven components. Damaged caused as a result of improper
power down WILL NOT be covered under warranty.
1. Follow steps 1 - 5 of the “ACCESSING THE SERVICE MENU” section.
SERVICE OPERATION
COOLING
✔


✖
8
9
8. Use the UP () or DOWN () arrows to navigate to the
COOLING option.
9. Touch the tick (✔) icon to conrm selection.
10. Adjust the temperature by using the UP () and DOWN ()
arrows on the right hand side of the screen.
11. Once the adjusted time has been entered correctly, press the
tick (✔) icon to accept or the cross (✖) icon to cancel.
225°F
✔


✖
10
11
TEMP
✔


✖
6
7
6. Use the UP () or DOWN () arrows to navigate to the TEMP
option.
7. Touch the tick (✔) icon to conrm selection.