Edge EDGE-3270 - Software Version Verification

82
support@edgeovens.com Technical Support: +1 (724) 628 3050
PREFACEOPERATION
SERVICE
OVEN OPERATION
OVEN INFORMATION (CONTINUED)
SOFTWARE VERSION VERIFICATION
1. Follow steps 1 - 4 of the “ACCESSING THE INFORMATION MENU” section, for instruction of how to
access the INFORMATION MENU options.
SYSTEM
✔


✖
3
2. Use the UP () or DOWN () arrows to navigate to the
SYSTEM option.
3. Touch the tick (✔) icon to conrm selection.
2
UI VERSION
✔


✖
5
4
4. Use the UP () or DOWN () arrows to navigate to the UI
VERSION option.
5. Touch the tick (✔) icon to conrm selection.
✔
✖
7
6. Record and verify UI software version.
7. Touch the cross (✖) icon to exit and return to the SYSTEM
menu level.
35
MC VERSION
✔


✖
9
8. Use the UP () or DOWN () arrows to navigate to the MC
VERSION option.
9. Touch the tick (✔) icon to conrm selection.
8
✔
✖
12
10. If your oven is equipped with a split-belt you will be provided
with an additional selection screen, navigate between the MC1
and MC2 options, touching the tick (✔) icon to conrm selection.
11. Record and verify MC software version.
12. Touch the cross (✖) icon to exit.
36