Edge EDGE-3270 - Oven Initial Start-Up; Start-Up Procedure; Warranty Activation; Decommissioning & Disposal

52
support@edgeovens.com Technical Support: +1 (724) 628 3050
INSTALLATION
OVEN INITIAL START-UP
All EDGE ovens are tested at the factory. Functional operation is veried and oven adjustments and settings
are made to ensure the oven is functioning properly. Field conditions may vary from factory conditions and
it may be necessary to have a licensed service technician verify operation and make eld adjustments as
required.
START-UP PROCEDURE
1. Ensure that all ovens have been installed in accordance with the Installation & Operation Manual and that
all utilities are connected to the ovens in compliance with local building codes.
2. With all gas appliances and ovens running, verify incoming gas pressure (please see “GAS CONNECTION”
of the “FINAL CONNECTIONS” section of this manual for further information). If INLET GAS PRESSURE is
not within EDGE specications contact gas supplier to arrange adjustment.
3. Once INLET GAS PRESSURE has been veried, repeat verication process for the MANIFOLD GAS
PRESSURE. See GAS CONNECTION and MANIFOLD ADJUSTMENT sections for further information.
4. Verify all gas pressure taps on the gas valve have been closed and leak tested.
5. Prior to ring the oven, ensure all tools are clear of the conveyor belt, control cabinets doors have been
closed and all necessary accessories have been installed:
a. Heat Shields
b. Belt Stops
c. Crumb Pans
d. Cool Walls
e. Chain Guards
f. Fire Suppression (Optional)
g. End Panel Bafes (Optional)
6. Complete Startup checklist with owner signature and return to EDGE.
Mistakes can be made and shipping incidents may occur. It is important that concerns and questions be
addressed as quickly as possible.
Should you have a question or concern, please talk with us. The EDGE customer service team can be
contacted at 888-480-3343. We are here and happy to help!
WARRANTY ACTIVATION
The OVEN INITIAL START-UP CHECKLIST, must be completed at time of commissioning, signed by the
customer and licensed service technician and returned to EDGE or the Authorized Distributor to initiate the
warranty policy. Please complete and mail this document you may also send a scanned copy to
warranty@edgeovens.com or submit via the www.edgeovens.com/support website.
In the event of disposal and decommissioning, please recycle. This process may include disassembly of the
control cabinet and inner assemblies. Please consult your local governing bodies for information related to laws,
statutes, ordinances, and/or guidelines which may regulate this activity.
DECOMMISSIONING & DISPOSAL
Failure to submit OVEN INITIAL START-UP CHECKLIST, or return incomplete, will
invalidate your warranty. A DUPLICATE copy of the checklist can be found at the back of
this manual.
IMPORTANT