Edimax IC-3110 - Page 104

CONFIGURING THE SURVEILLANCE SOFTWARE
INSTALLING THE 16-CHANNEL VIEWER SOFTWARE
2. Click Configure Cameras to show the configuration
screen.
Camera ID
Password
The Camera ID is the camera's MAC address, which is
found on the camera itself, or by running the EdiView
Finder utility.
7. Click OK to save the changes or Cancel to discard.
3. Select a Channel from one to sixteen.
4. Select the Camera tab.
5. Click the DDNS Free radio button to select DDNS Free
mode.
6. In DDNS Free, enter the following:
3-60