Edimax IC-3110 - Viewing the Camera List; Viewing Multiple Camera Live Views; Pan;Tilt Live View

USING THE SURVEILLANCE SOFTWARE
VIEWING THE CAMERA LIST
4.5.2 Viewing the Camera List
Viewing Multiple Camera Live Views
Tap the button on the upper left corner of the screen to
cycle between one, four and twelve camera live views.
Pan/Tilt Live View
Tap the button on the upper right corner of the screen to
switch to Gesture mode. Slide a finger over the live image
view to move the network camera in the desired direction.
Note:
If the button that appears in the upper-right corner
says Switch, the camera can not move.
4-27