USING THE SURVEILLANCE SOFTWARE
4.3.6 Snapshot and Recording
You can take a snapshot with a selected camera and save
the image to a local directory.
You can start recording the image of a selected camera by
clicking the Start Recording button.
Click the Snapshot button once to take a snapshot.
When recording starts, you'll see a message such as 1/1
10:00:00. Camera 1 Start Manual, which means
camera 1 has started recording manually on 1/1 at 10:00:00.
To stop recording, click the Start Recording button
again. A message such as 1/1 10:00:00 Camera 1
Stop Manual will appear.
To Next Page
Loading...
