Edimax IC-3110 - Manually Adding a Network Camera on a LAN in IP Mode

CONFIGURING THE SURVEILLANCE SOFTWARE
INSTALLING THE ANDROID SURVEILLANCE SOFTWARE
Manually Adding a Network Camera on a LAN
in IP Mode
Note:
Cameras added in IP mode can only be accessed on
the local network.
1. Tap the Cloud/IP Mode button to set the mode to IP.
2. Enter information into the following fields:
PARAMETER
DESCRIPTION
Camera Name
IP Address / DDNS
Port
Username
Define a name for the camera that
is displayed in the camera list.
Enter the IP address or the host
name of a network camera.
Enter the port number of the cam-
era.
Enter the username of the network
camera. The default value is
admin.
Enter the password to access the
network camera. The default value
is 1234.
Password
3. Tap Add to add the camera to the list. Tap Cancel to
discard the changes.
3-83