Edimax IC-3110 - Configuring Network Settings on a LAN in IP Mode

CONFIGURING THE SURVEILLANCE SOFTWARE
IOS
SURVEILLANCE SOFTWARE CONFIGURATION OPTIONS
Configuring Network Settings on a LAN
in IP Mode
1. Tap the text box of a parameter and enter new informa-
tion to change the network configuration settings.
PARAMETER
DESCRIPTION
Camera Name
IP Address
Port
Username
Define a name for the camera that
is displayed in the camera list.
Enter the IP address of a network
camera.
Enter the port number of the cam-
era.
Enter the username of the network
camera. The default value is
admin.
Enter the password to access the
network camera. The default value
is 1234.
Password
2. Tap Done to save the changes. Tap Cancel to discard
the changes.
3-97