Edimax IC-3110 - Manually Adding a Network Camera on the Cloud with Cloud Mode

CONFIGURING THE SURVEILLANCE SOFTWARE
INSTALLING THE ANDROID SURVEILLANCE SOFTWARE
Manually Adding a Network Camera on the
Cloud with Cloud Mode
1. Tap the Cloud/IP Mode button to set the mode to
Cloud.
2. Enter information into the following fields:
\
PARAMETER
DESCRIPTION
Camera Name
Cloud ID
Define a name for the camera that
is displayed in the camera list.
Enter the Cloud ID of the network
camera. The Cloud ID is a twelve
character, alphanumeric value of
the network camera found on the
included Cloud ID card (see
Figure 3-1).
Enter the username of the network
camera. The default value is
admin.
Enter the password to access the
network camera. The default value
is 1234.
Username
Password
3. Tap Add to add the camera to the list. Tap Cancel to
discard the changes.
3-84