USING THE SURVEILLANCE SOFTWARE
USING THE WEB-BASED MANAGEMENT INTERFACE
Click the Camera menu item to return to this screen.
Pan/Tilt Speed
(Only for sup-
ported models)
Specifies the moving speed when you
use the pan / tilt feature to point the
camera in a new direction. Available
options are 1 (fastest) to 5 (slowest).
Select 1 to move the camera at a faster
speed, but you will not be able to con-
trol the movement precisely. If you want
to move the camera in a more accurate
manner, select a slower speed.
Specifies video encoding type. Avail-
able options are „MPEG4‟, „MJPEG‟,
and „H.264‟. Different encoding types
have different bandwidth requirements,
and provide different video quality.
If the place where this network camera
points to has fluorescent light(s), the
image may flicker. Adjust this setting to
match the frequency of your electrical
power; this may improve the image
quality.
If you're not putting this camera on a
horizontal surface but hanging the cam-
era on the ceiling or wall, you can use
this feature to rotate the displayed
image.
Select brightness, saturation, or sharp-
ness from the dropdown menu, and
click the + or - buttons to increase or
decrease brightness / saturation /
sharpness settings. In certain environ-
ments, adjusting brightness, saturation,
and/or sharpness helps improve video
quality.
Brightness /
Saturation /
Sharpness
To Next Page
Loading...
