Edimax IC-3110 - Page 64

CONFIGURING THE SURVEILLANCE SOFTWARE
CONFIGURING NETWORK SETTINGS
ITEM
WPA Pre-
Shared Key
WEP Key
Length
WEP Key For-
mat
Default Key
WEP Key 1
WEP Key 2
WEP Key 3
WEP Key 4
Wireless Key
DESCRIPTION
ITEM
Push Button
Configuration
DESCRIPTION
Click this button and the camera will
enter a PBC-style WPS connection
state for 120 seconds. Please push the
Start button on the wireless access
point you wish to connect to within 120
seconds to establish a WPS connection
(The remaining time will be displayed
on the button).
If a connection can not be established
within 120 seconds, you will be
prompted by a message box, and you
can press the Start PBC button to try
again.
Enter the encryption key of the selected
wireless access point here. This is
required when the access point you
wish to connect to uses encryption.
This displays the WPS pin code used to
connect to WPS-enabled wireless
access points. You must input this num-
ber into the WPS enabled access point
to establish a WPS connection.
PIN Code Con-
figuration
If you have the wireless access point‟s
WPS PIN code, you can enter it here
and press the Start button to start to
establish a PIN-style WPS connection.
Device PIN
Code
3-20