Edwards EV1000

Chapter 5: Navigating the EV1000 Clinical
Platform NI
ll monitoring functions are initiated by touching the
appropriate area on the touch screen. The navigation
bar includes various controls for scrolling and
selecting screens, performing clinical actions,
adjusting system settings, capturing screen shots and
silencing alarms.
Navigation Bar
The Navigation Bar is present on most screens. Exceptions
are the startup screen and screens indicating the EV1000 has
stopped monitoring, for example when Demo Mode ends.
GDT Tracking. This button displays the GDT
Tracking Menu. Enhanced parameter tracking
allows a user to manage key parameters in the
optimal range. See Chapter 9: GDT Tracking on
page 9-1.
Monitor Screen Selection. The monitor screen
selection button allows the user to select the
desired number of monitored parameters
displayed and the type of monitoring view used to
display them, which is highlighted in color (see Figure 5-2,
“Example of Monitoring Screen Selection Window,” on
page 5-2). When a monitoring view screen is selected, that
monitoring mode is immediately displayed.
To return to the most recent monitoring screen
displayed, touch the Cancel button.
Clinical Actions. The Clinical Actions button
provides access to the following clinical actions:
• Zero & Waveform
• CVP Entry
• Derived Value Calculator
• Event Review
• Advanced Options
• Cuff Options
• Historical Data
Settings. The Settings button provides access to
configuration screens which include:
• Patient Data
• Monitor Settings
• Parameter Settings
• Data Download
• Demo Mode
• Engineering
• Help
Snapshot. The Snapshot button captures an
image of the screen at the current time. A portable
drive attached to the USB port on the Panel
“monitor” is required to save the image.
Figure 5-1 Navigation Bar
A
GDT
Tracking
Monitor
Screen
Selection
Clinical
Actions
Settings
Snapshot
Start/Stop
Monitoring
Silence
Audible
Alarm