EasyManua.ls Logo

Edwards EV1000

Edwards EV1000
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Navigating the EV1000 Clinical Platform NI
5-8
SVV Filtering Exceeded Indicator. The SVV
Filtering Exceeded Indicator symbol appears if a high
degree of pulse rate variability is detected that could
affect the SVV value.
Fault. When a fault condition occurs, the fault message(s)
will be displayed on the Status Bar until the fault condition is
cleared. When there is more than one fault, alert or alarm, the
message is cycled every two seconds.
When a fault condition occurs, parameter calculations are
stopped, and each affected parameter globe displays the last
value, time, and date at which the parameter was measured.
Continuous % Change Indicator. This indicator displays
the percentage of change, followed by the time period over
which it changed.
The continuous % change indicator appears on most of the
monitoring screens, but does not appear on the Tabular
Trends monitoring screen.
Target Status Indicators. The colored indicator at the top of
each monitoring globe indicates the patient’s clinical status.
For indicator colors and their clinical indications, See
Table 6-1: “Target Status Indicator Colors” on page 6-5.
Monitor Screen Navigation
There are several standard navigational procedures on the
monitor screen.
Vertical Scrolling
Some screens will have more information than fits on the
screen at one time. If vertical arrows appear on a review list,
such as on the Event Review screen, touch the up or down
arrow to see the next set of items.
If selecting from a list, such as on the Faults category help
screen, the vertical scroll arrows move up or down one item
at a time.
To perform any activity, touch the control button. There are
some buttons that always perform the same function:
Home. The home button takes you to the most
recently viewed monitoring screen and stores any
modification made to data on the screen.
Return. The return button takes you to the previous
menu screen and stores any modification made to
data on the screen.
Cancel. The cancel button causes any entries to be
discarded.
Figure 5-14 Vertical Scrolling Review List
Figure 5-15 Vertical Scrolling Selection List

Table of Contents

Other manuals for Edwards EV1000

Related product manuals