EasyManua.ls Logo

Edwards EV1000

Edwards EV1000
114 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 11: Demonstration Mode and Data
Download
emonstration Mode is used to display simulated
patient data to assist in training and demonstration.
Demonstration mode displays data from a stored set
and continually loops through a predefined data set. During
Demo Mode the EV1000 user interface retains the same
functionality as a fully operational EV1000 platform.
Simulated patient demographics must be entered to demon-
strate ClearSight technology functions. The user can touch
the controls as if a patient was being monitored.
The Pump-Unit and Databox Ethernet cables must be discon-
nected from the EV1000 Monitor in order to enter demon-
stration mode. The system will not run Demo Mode when
there is communication with the Pump-Unit and/or Databox.
When Demo Mode is entered, trended data and events are
cleared from being displayed and saved for return to patient
monitoring.
1 Disconnect Ethernet communication cable(s) from the
Monitor.
2 Touch the Settings button.
3 Touch Demo Mode
.
When the EV1000 monitor runs in Demo Mode, all
audible alarms are disabled.
4 When the Demo Mode Confirmation Screen appears, the
user has the option to demo the monitor in FloTrac mode,
VolumeView mode or ClearSight mode. Select Clear-
Sight and touch Yes.
5 To initiate ClearSight continuous hemodynamic
monitoring demonstration, simulate zeroing the
HRS through the Clinical Actions screen.
6 To start the display of continuous parameters
touch the Start Monitoring button on the
Navigation bar.
7 The monitor must be restarted prior to monitoring a
patient.
Figure 11-1 Settings Screen
D
Figure 11-2 Demo Mode
WARNING
Make sure that Demo Mode is not activated in a clinical
setting to ensure that simulated data is not mistaken for
clinical data.
Figure 11-3 Live Demo Banner
CAUTION
The LIVE DEMO mode can only be initiated by an
Edwards sales representative and is different from
Demo Mode. If a LIVE DEMO banner appears on the
screen, as shown in Figure 11-3, discontinue use of the
EV1000 Clinical Platform NI and contact your local
sales representative.

Table of Contents

Other manuals for Edwards EV1000

Related product manuals