11-2
Demonstration Mode and Data Download
Data Download
The Data Download screen allows the user to export
monitored patient data to a USB device in Windows Excel
XML 2003 format. This screen also exports Case Reports and
GDT Reports in Adobe PDF format.
The screen will return to the monitoring view after two
minutes of inactivity.
1 Touch the Settings button.
2 Make sure an approved Edwards USB device has been
inserted.
3 Touch Data Download.
Monitoring Data. To generate a spreadsheet of monitored
patient data:
1 Touch the value side of the Interval button and select
the frequency at which the data will be sampled for
download. The shorter the frequency, the greater the
amount of data. Options are:
• 20 seconds (default)
• 1 minute
• 5 minutes
2 Touch Download Data.
Case Report. To generate a report of key parameters:
1 Touch Case Report.
2 Select desired parameters from the Case Report
popup menu.
3 Check De-Identify to exclude patient
demographic data.
4 Touch Enter to export PDF
GDT Report. To generate a report of GDT tracking
sessions:
1 Touch GDT Report.
2 Select desired GDT tracking session(s) from the GDT
Report popup menu. Use the scroll buttons to select
older tracking sessions.
3 Check De-Identify to exclude patient
demographic data.
4 Touch Enter to export PDF
Do not disconnect the USB device until the message
appears that the download is complete.
If a message appears stating that the USB device is out of
space, insert a different USB device and restart the
download.
All monitored patient data may be cleared by the user if
patient monitoring is stopped. Touch the Clear All button and
confirm to clear.
Figure 11-4 Data Download
CAUTION
Use Windows Embedded Standard 2009 compatible
USB devices.
To Next Page
Loading...
