Edwards EV1000

3-3
Unpacking and Initial Setup
3 Connect the main plug from the Pump-Unit to a hospital
grade outlet.
The Pump-Unit is equipped with a battery to allow
uninterrupted monitoring during power loss. There are four
indicator lights on the Pump-Unit. See Chapter 12: Pump-
Unit Communication and Power for a description of these
indicators.
 The EV1000 Clinical Platform NI is rated for power
voltages from 100 to 240VAC.
See Appendix A: Specifications for physical, electrical,
thermal, and atmospheric requirements.
 Ethernet Connection from Pump-Unit to
EV1000 Monitor
 Power to EV1000 Monitor from Pump-Unit
 Detachable Power Cord
 Patient Monitor Adapter Cable
 Pressure Controller Cable
Figure 3-1 EV1000 Clinical Platform NI Cable Connections










WARNING
The EV1000 Clinical Platform NI meets the
requirements of IEC 60601-1:2005 for the system
configurations described in this manual. Connecting
external equipment or configuring the system in a way
not described in this manual may not meet this
standard.