6-9
Monitor Display Options
4 For each parameter, touch the Lower button to enter the
minimum value to appear the vertical axis. Touch the
Upper button to enter the maximum value.
5 Touch the right side of the Graphical Trend Time value
button to set the total amount of time displayed on the
graph. The options are:
6 Touch the right side of the Tabular
Increment value button to set the
amount of time to each tabbed value.
The options are:
7 To advance to the next set of parameters, touch the arrow
at the bottom left.
8 Touch the Home button to return to the
monitoring screen.
Engineering
The engineering function can only be operated by a system
engineer and is password protected. If an error is encoun-
tered, start by referring to Chapter 12 “Help and Trouble-
shooting”.
• 3 minutes • 1 hour • 12 hours
• 5 minutes • 2 hours (default) • 18 hours
• 10 minutes • 4 hours • 24 hours
• 15 minutes • 6 hours • 48 hours
• 30 minutes
• 1 minute (default) • 30 minutes
• 5 minutes • 60 minutes
• 10 minutes
Figure 6-14 Tabular Increment Popup
To Next Page
Loading...
