Edwards EV1000

Monitor Display Options
6-4
Serial Port Setup
Use Serial Port Setup Menu to configure the serial port for
digital data transfer.
The screen displays until you touch the Return button or until
two minutes have passed with no activity.
1 Touch the Settings button.
2 Touch Monitor Settings.
3 Touch Serial Port Setup.
4 Touch the button of any parameter to change it.
5 Touch the Return button when the configuration of serial
port settings is complete.
 A RS232 9 pin serial port is available for real time
communication to support patient monitoring systems
through the IFMout protocol.
Restore Monitor Defaults
When the defaults are restored, the EV1000 platform stops all
functions and restores the system to a factory default state.
1 Touch the Settings button.
2 Touch Monitor Settings.
3 Touch Restore All Defaults. A confirmation screen
appears.
4 Touch Ye s to continue. You will see an instructional
screen.
5 Turn the Monitor and Pump-Unit off and then follow the
start-up process.
Parameter Settings
1 Touch the Settings button.
2 Touch Parameter Settings.
Figure 6-6 Serial Port Setup
CAUTION
Restore Defaults replaces all settings with factory
defaults. Any settings changes or customizations will be
permanently lost. Do not restore defaults while
monitoring a patient.
Figure 6-7 Parameter Settings