Edwards EV1000

Clinical Actions and Analysis
10-2
3 To scroll up or down, touch the arrow keys.
4 Touch the Home button to return to the
monitoring screen.
The following events are included in the Event
Review log.
Cuff Options
The Cuff Options screen allows the user to select
the time interval between Cuff Pressure Release and
the switching time interval for double cuff monitoring. Cuff
and HRS status are also displayed. See “Cuff Options” on
page 7-8.
Advanced Options
The Advanced Options screen provides CO
Calibration. During CO calibration, a fixed
average of the CO value (up to 5 minutes) is calibrated
against a reference CO value input by the user. See “Cardiac
Output Calibration” on page 7-9. The Advanced Options
screen also allows the user to disable Physiocal for up to 1
minute. See “Physiocal Control” on page 7-10.
Table 10-1 Reviewed Events
Event Log Time
BSA Change The BSA value changes from the
previous BSA value (including when
BSA goes to/from blank).
CO Reference Cleared An entered CO reference value is
cleared.
CO Reference Entered:
<value><units>
A CO reference value is entered.
CO Reference Value The ClearSight algorithm is
calibrated by the user.
Cuff 1 Monitoring Cuff 1 monitoring begins.
Cuff 2 Monitoring Cuff 2 monitoring begins.
Cuff monitoring stopped
due to 8 continuous hours
with a single cuff
Monitoring for 8 continuous hours
on a single Cuff has occurred.
Cuff Pressure Release A Cuff pressure release has
occurred.
Custom Event A customized user event
CVP Entered A CVP value is entered and the
value is noted.
CVP Cleared An entered CVP value is cleared.
GDT Session Started: #nn A GDT Tracking Session is started.
‘nn’ is the GDT tracking session
number for the current patient.
GDT Session Stopped:
#nn
A GDT Tracking Session is
stopped. ‘nn’ is the tracking session
number for the current patient.
GDT Session Paused:
#nn
A GDT Tracking Session is paused.
‘nn’ is the tracking session number
for the current patient.
GDT Session Resumed:
#nn
A GDT Tracking Session is
resumed. ‘nn’ is the tracking
session number for the current
patient.
GDT Session Targets
Updated: #nn;
<pppp>:<qqq><uuu>,<...
>
GDT Tracking Session targets are
updated. ‘nn’ is the tracking session
number for the current patient,
<pppp> is the parameter whose
target range <qqq> with units
<uuu> was updated. <...> additional
targets were updated.
Fluid Challenge A Fluid Challenge intervention
analysis is performed.
HRS Zeroed HRS is zeroed by the user.
Intervention An Intervention analysis is
performed.
Intervention Analysis (IA)
Updated
When user edits a previously
entered intervention time, date, or
note
Monitoring Paused Active monitoring paused to prevent
audible alarms and parameter
monitoring.
Monitoring Resumed Normal monitoring resumed.
Audible alarms and parameter
monitoring are active.
ClearSight Monitoring
Started
The user begins noninvasive
system monitoring.
ClearSight Monitoring
Stopped
The user or system stops
noninvasive system monitoring.
ClearSight Monitoring
Resumed
When monitoring resumes after a
cuff pressure release.
Physiocal Disabled Physiocal is temporarily disabled.
Physiocal Enabled Physiocal is resumed by the system
or user after having been stopped
by the user.
Position Challenge When a Position Challenge
Intervention Analysis is performed.
System Restart Recovery System has resumed monitoring
without prompt following a power
cycle.
Technology Switch
Occurred
Monitoring is switched from one
technology mode to another.
Time Change The system clock is updated.
Table 10-1 Reviewed Events
Event Log Time