Monitor Display Options
6-8
Time Intervals / Averaging
The Time Intervals / Averaging Screen lets the user select the
continuous % change time interval.
The screen will return to the monitoring view after two
minutes of inactivity.
1 Touch the Settings button.
2 Touch Parameter Settings.
3 Touch Time Intervals / Averaging.
4 Touch the right side of the Continuous % Change
Interval value button and touch one of the following time
interval options:
5 Touch the Home button to return to the
monitoring screen.
Adjust Scales
The graphical trend data fills the graph from left to right with
the most recent data at the right. The parameter scale is on the
vertical axis with the time scale on the horizontal.
The scales setup screen lets you set up both the parameter and
time scales. The key parameters are at the top of the list. Use
the horizontal scroll buttons to see additional parameters.
1 Touch the Settings button.
2 Touch Parameter Settings.
3 Touch Adjust Scales.
The screen will return to the monitoring view after two
minutes of inactivity.
Figure 6-11 Time Intervals / Averaging
• None • 15 min
• 5 min • 20 min
• 10 min • 30 min
Figure 6-12 Graphical Trend Screen
Figure 6-13 Adjust Scales
To Next Page
Loading...
