5-9
Navigating the EV1000 Clinical Platform NI
On some screens, for example Patient Data, there is no cancel
button. As soon as you enter the patient’s data, it is stored by
the system.
List buttons. Some of the screens have buttons that appear to
be split in two.
In these cases, touching anywhere on the button reveals a list
of selectable items. The right side of the button displays the
current selection.
Value but ton . Some screens have square buttons as shown
below. Touch the button to display a keypad.
Toggle button. When an option exists between two choices,
such as on/off, a toggle button appears.
Touch on the opposite side of the button to switch the choice.
Keypad. Touch the keys on the keypad to enter data.
Information Bar
The information bar appears on all active monitoring screens
and most clinical action screens. It displays the current time,
date, Physiocal interval status, battery status and the screen
lock symbol. When the Pump-Unit is connected during non-
invasive monitoring, the information bar will appear as
shown in Figure 5-16.
Figure 5-16 is an example of an information bar with
U.S. standard defaults. To see the defaults for all languages,
see Appendix C, Table C-5: Language Default Settings.
Physiocal Interval
Physiocal is an automatic calibration of the arterial waveform
which occurs at regular intervals during ClearSight
monitoring. See “Physiocal Method” on page 7-1 and
“Physiocal Control” on page 7-10. The interval between
Physiocals is displayed on the information bar in parenthesis
next to the Physiocal interval icon (see Table 5-4).
Backspace
Cancel
Enter
Decimal
Figure 5-16 Information Bar
Table 5-4 Physiocal Interval Status
Icon
Appearance
Icon
Color
Physiocal
Beats
Interval
Green ≥30
Orange <30
White Physiocal
status not
available
Time Date Physiocal Battery Lock
Interval Screen
To Next Page
Loading...
