Chapter 13: EV1000 Clinical Platform NI
Accessories
he EV1000 Clinical Platform NI offers various acces-
sories. This chapter identifies and describes the use of
some of the accessories available. Refer to Appendix
A, Table A-4 for associated model numbers on all
EV1000 Clinical Platform NI accessories.
Stands
All stands are compatible with the clamp supplied with your
EV1000 system which is suitable for 19-38 mm poles only.
Contact your Edwards representative on mounting carts,
racks or other options.
EV1000 Table Stand
The EV1000 Table stand is intended for use with the EV1000
monitor and EV1000 Pump-Unit. The EV1000 Table stand
comes pre-assembled (see Figure 13-1). Ensure rigidity of the
stand by verifying that the post is securely mounted to the
base. Place the table stand on a flat surface and securely
mount the monitor and Pump-Unit to the pole.
EV1000 Roll Stand
The EV1000 Roll Stand is intended for use with the EV1000
monitor and EV1000 Pump-Unit. Follow included directions
for EV1000 Roll Stand assembly and warnings. Place the
assembled roll stand on the floor, ensuring that all wheels are
in contact with the floor, and securely mount the Monitor and
Pump-Unit to the pole using the supplied clamps.
Figure 13-1 EV1000 Table Stand
Figure 13-2 EV1000 Roll Stand
To Next Page
Loading...
