CONTENTS (CONTINUED)
Section Title Page
5.3.6 Frame control (checksum) 86
5.3.7 Error control 86
5.3.8 Transmission frame in the RS485 multi-point connection 86
5.3.9 Control command in the RS485 multi-point connection 88
5.3.10 Query command in the RS485 multi-point connection 89
5.3.11 Broadcasting command in the RS485 multi-point connection 90
5.3.12 Application note 91
5.4 Command specifications 95
5.4.1 Command list 95
5.4.2 ReadMeas 96
5.4.3 Command 96
5.4.4 ReadFailMess 97
5.4.5 ReadModFonct 101
5.4.6 ReadVersion 103
5.4.7 ReadCounters 104
5.4.8 ReadSetPoint 105
5.4.9 ReadMotorTemp 105
5.4.10 ReadStatus 106
5.4.11 ReadEvents 107
5.4.12 SetSpeedSetPoint 108
5.4.13 ReadSpeedSetPoint 109
5.4.14 ReadModFonctWithWarning 110
5.4.15 ReadMeasValue 113
5.4.16 ReadOptionFunc 115
5.4.17 SetOptionFunc 118
5.4.18 ReadCondition 120
5.4.19 ReadEventsWithTime 122
5.4.20 SetOptions 126
5.4.20.1 Second speed option setting 126
5.4.20.2 Second speed selection 127
5.4.21 ReadOptions 128
5.4.21.1 Second speed function setting 128
5.4.21.2 Second speed select 129
6 STP-LINK AND DISPLAY UNIT 131
6.1 STP-Link 131
6.2 Display unit 132
To Next Page
Loading...
