DICOM 10-5
DICOM storage setting items are described as follows:
Name Description
Device
After you set the server (s) in DICOM Server Setting, the name
(s) will appear in the drop-down list, select the name of the
storage server.
Service Name Default is xxx-Storage, and it can be modified.
AE Title
Application Entity title, Here, it should be consistent with that of
the storage server.
Port
DICOM communication port, 104 by default. Here, the port should
be consistent with that of the storage server port.
Maximum Retries Range: 0-9.
Interval Time(s) Reserved feature.
Timeout
Refers to time after which the system will stop trying to establish
a connection to the service. Value: 5ˉ60s, in increments of 5s,
and 15 by default.
Color Mode Gray/ Mixed/ Color
Compression Mode
Select the compression mode: uncompressed, RLE, JPEG and
JPEG2000.
Compression Ratio Select the compression ratio: lossless, low, medium and high.
Allow Multiframe If SCP supports this function, then select it.
[Add] Add the DICOM service to the service list.
[Cancel] Click to cancel the parameter setting.
To Next Page
Loading...
Need help?
General
