5-10 Image Optimization
Effects When time mark is displayed on the M mode image, it's much easier to identify
the cardiac cycles and detect more details.
Impacts The function is available in real-time imaging, freeze or cine review status.
Display Format
Description To set the display format of M mode image with B mode image.
Operation Adjust through the [Display Format] item in the menu;
There are 4 formats available for the images display: L/R, V1:1, V1:2, Full.
Effects Adjust according to the actual situation and obtain a desired analysis through
comparison.
Impacts The function is available in real-time imaging, freeze or cine review status.
Speed
Description This function is used to set the scanning speed of M mode imaging, and the
real-time speed value is displayed in the image parameter area in the upper
left corner of the screen.
Operation Change the speed through the [Speed] item in the menu;
Or adjust it in the image parameter area.
There are 6 levels of scan speed available, the smaller the value the faster the
speed.
Effects Speed changing makes it easier to identify disorders in cardiac cycles.
IP
Description IP is a combination of several image processing parameters ,which is used for a
convenient image optimization. The IP combination number is displayed on the
image parameter area on the right part of the screen.
The M IP combination parameters include dynamic range and M soften.
Operation Select among the IP groups through the [IP] item in the menu;
Or adjust it in the image parameter area.
The system provides 8 groups of IP combinations, and the specific value of
each parameter can be preset.
Colorize and Colorize Map
Description Colorize function provides an imaging process based on color difference rather
than gray distinction.
Operation Turn on or off the function through the [Colorize] item in the menu;
Select the colorize map through the [Colorize Map] item in the menu;
The system provides 16 different maps to be selected among.
Impacts The function is available in real-time imaging, freeze or cine review status.
Gray Rejection
Description This function is to reject image signals less than a certain gray scale, then the
rejected signal corresponding area turns black.
Operation Click [Gray Rejection] on the image menu to adjust.
The adjusting range is 0-5.
To Next Page
Loading...
Need help?
General
