EIM TEC2000 User Manual

5. Customizing Actuator Settings
TEC 2000 Installation & Operation Manual E2K-405-0902
5-20
5.6.6. Inhibit and ESD Setup
1. At the “INHIBIT AND ESD SETUP?” prompt answer “YES.”
2. Use the selector knob (NEXT/BACK) to review the settings for Control Inhibits and
Emergency Shut Down.
3. Use the control knob (NO) to select either ON or OFF for each setting; then answer “YES.”
Figure 5-11 details each setting.
Figure 5-11 Inhibit and ESD Setup
Goto next display
see Figure 5-4
INHIBIT AND
ESD SETUP?
OPEN INHIBIT
ON
NO
YES
CLOSE
INHIBIT ON
NO
YES
LOCAL ESD
ON
NO
YES
BACK NEXT
YES
NO
HOST ESD ON LOST COM
ESD OFF
NO
YES
CLOSE ON
ESD
NO
YES
YES
NO
LOCAL ESD OFFCLOSE INHIBIT
OFF
OPEN INHIBIT OFF
HOST ESD OFF LOST COM
ESD ON
OPEN ON ESD
STAYPUT ON ESD
ESD
OVERRIDE ON
THERMAL:
OFF
NO
YES
ESD OVERRIDE ON
THERMAL: ON
ESD
OVERRIDE ON
LOCAL: ON
ESD
OVERRIDE ON
STOP: OFF
NO
YES
ESD
OVERRIDE ON
INHIBIT: ON
NO
YES
YES
NO
ESD OVERRIDE ON
LOCAL: OFF
ESD OVERRIDE ON
STOP: ON
ESD OVERRIDE ON
INHIBIT: OFF
ESD
OVERRIDE ON
TORQUE: OFF
NO
YES
ESD OVERRIDE ON
TORQUE: ON
Goto next display
see Figure 5-4

EIM TEC2000 Specifications

General

Brand	EIM
Model	TEC2000
Category	Controller
Language	English