1. Important Notes
TEC 2000 Installation & Operation Manual E2K-405-0902 1-1
1 Important Notes
1.1. Purpose
This installation and operation manual explains how to install, operate, and maintain the TEC
2000 valve actuator.
X WARNING: Read this manual in its entirety before installing, operating, or
performing maintenance on the TEC 2000 valve actuator.
X WARNING: Use caution when working on, with, or around valves and actuators.
High pressures, forces, voltages, and flammable media can be present.
X WARNING: Failure to follow instructions for proper electrical wiring, storage, setup,
and maintenance may cause serious injury, damage equipment, or void warranty.
1.2. User Safety
Safety notices in this manual detail precautions the user must take to reduce the risk of
personal injury and damage to the equipment. The user must read these instructions in their
entirety. Failure to observe these safety notices could result in serious bodily injury, damage
to the equipment, void of the warranty, or operational difficulty.
Safety notices are presented as follows:
X WARNING: Alerts user of potential danger; failure to follow the warning notice could result
in serious personal injury or death.
CAUTION: Identifies precautions the user must take to avoid personal injury or equipment
damage.
NOTE: Highlights information critical to the user’s understanding of the TEC 2000 valve
actuator installation or operation.
To Next Page
Loading...
Need help?
General
