7-2 Component Ordering Information
P/N 0013-1027-005 Rev A
TABLE 7.3 Part Numbers of Cables
Part Number Description
9101-2024-XXX
1
IQ Programming Terminal Cable(RS-232)
(P6 Connector)
2
9101-2025-XXX
1
IQ Operator Terminal Cable(RS-232)
(P7 Connector)2
9101-2027-XXX
1
IQ Motor Encoder Cable
(P5 Connector)
9101-1474-XXX
1
IQ Motor Encoder Cable for N-Series Motors
(P5 Connector)
9101-1469-XXX
1
IQ Motor Encoder Cable for N-Series Motors
(No P5 Connector)
9101-2135-025 or 050 IQ Motor Encoder Cable - 90° Motor Connector for S and F
Series Motors (P5 Connector)
9101-2031-XXX
1
IQ Encoder Cable
3
9101-2127-002 IQ P4 to P4 Master/Follower Cable
9101-2030-010 IQ Control Station Cable
9101-0250-XXX
1
IQ-5000/S- or H-3000 Motor Power Cable with Motor Connector
9101-0251-XXX
1
IQ-5000/S- or H-4000/F-4000 Motor Power Cable
9101-0252-XXX
1
IQ-5000/S- or H-6000/F-6000 Motor Power Cable
9101-0253-XXX
1
IQ-5000/S- or H-8000 Motor Power Cable
9101-1080-XXX
1
IQ-2000/S- or H-2000/S- or H-3000 Motor Power Cable
9101-1081-XXX
1
IQ-2000/S- or H-4000/F-4000 Motor Power Cable
9101-1467-XXX
1
IQ-2000/N-Series Motor Power Cable
9101-2179-XXX
1
IQ-2000/S- or H-6000/F-6000 Motor Power Cable
44-0141-003 IQ 2000/5000 to I/O Conversion Card, 3-foot Cable
44-0141-010 IQ 2000/5000 to I/O Conversion Card, 10-foot Cable
1. Standard cable lengths are 010 = 3m (10 ft), 025 = 7.68 m (25 ft), 050 = 15 m (50 ft),
075 = 23 m (75 ft), 100 = 30 m (100 ft). XXX in the part number denotes the cable length in
feet.
2. RS-232 cables are available in 3m and 7.68m (10 and 25 ft) lengths only
3. Cable terminated on PDM end only.
TABLE 7.4 Personality Module Identification Codes
X = Customer Special
No Letter = Standard
0 = Motor without Fan
2 = Motor with Fan
Feedback Encoder Line Count
H = 2000 (Standard for S and F Motors)
Motor Winding Ke (Volts/1000 RPM)
Motor Model Number
PDM Switching Frequency
A = 5 KHz (IQ 5000 Standard)
B = 10 KHz (IQ 2000 Standard)
Drive Module Peak current Rating
Personality module
* IQ Master, Versions 3.2 and above, provide software selection and programming of PDMs.
IQ 025 - S4030 PH OXA
To Next Page
Loading...