Bluetooth Analyzers
Page 144 of 264 | Display Filters
The
Device Traffic Filter
window appears:
To keep only specified devices:
1. Click on the Filtering button located on the Tool Bar.
2. In the
Device Traffic Filters
dialog, double-click the desired devices in the Device Database to
add these devices to the Traffic Filtering Criteria, or select the desired device and click on the
Add button in the Traffic Filtering Criteria.
Devices selected are populated into the Traffic Filtering Criteria tab.
Note that Keep Only Selected Devices will be the automated selection with
two or more devices added, but this can be changed as desired. With a single
device added, the default will be Keep Involving.
3. Click OK.
All panes in the application are updated to show only the selected devices (if present). Devices not included in
the Traffic Filtering Criteria will be captured but hidden.
The Filtering button is updated to show the filter created:
To Next Page
Loading...
Need help?
General
