14 – 4
Section 14 • Maintenance Screen
MicroVission Controller • Operation and Service Manual • Emerson • 35391MV 1.3
When the maintenance is up-coming or already over-
due, the operator can sign-off on a maintenance item by
pressing on the service interval eld, and a conrmation
pop-up will get displayed. Refer to Figure 14-6.
Figure 14-6. Maintenance Screen – Conrmation for Maintenance Sign-Off
Performing the sign-off operation will cause the service
interval eld to be highlighted with a green background
and the maintenance log will be updated with the item
performed. Refer to Figures 14-7 & 14-10.
Figure 14-7. Maintenance Screen – Maintenance Screen – Maintenance Sign-Off
To Next Page
Loading...
