Endress+Hauser Proline Promag H 300 - Page 137

Proline Promag H 300 PROFINET Operation
Endress+Hauser 137
Data logging status
→  138
Entire logging duration
→  138
‣
Display channel 1
‣
Display channel 2
‣
Display channel 3
‣
Display channel 4
Parameter overview with brief description
Parameter Prerequisite Description Selection / User
entry / User
interface
Factory setting
Assign channel 1 The Extended HistoROM
application package is
available.
Assign process variable to
logging channel.
• Off
• Volume flow
• Mass flow
• Corrected volume
flow
• Flow velocity
• Conductivity
*
• Corrected
conductivity
*
• Temperature
*
• Electronic
temperature
• Current output 1
*
• Current output 2
*
• Current output 3
*
• Current output 4
*
• Noise
*
• Coil current shot
time
*
• Reference
electrode potential
against PE
*
• Coating measured
value
*
• Test point 1
• Test point 2
• Test point 3
Off
Assign channel 2 The Extended HistoROM
application package is
available.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Assign process variable to
logging channel.
Picklist, see Assign
channel 1 parameter
(→  137)
Off
Assign channel 3 The Extended HistoROM
application package is
available.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Assign process variable to
logging channel.
Picklist, see Assign
channel 1 parameter
(→  137)
Off