Endress+Hauser Proline Promag W 400 - Page 109

Proline Promag W 400 EtherNet/IP Diagnostics and troubleshooting
Endress+Hauser 109
Diagnostic behavior
Symbol Meaning
A0013961
Alarm
• Measurement is interrupted.
• Signal outputs and totalizers assume the defined alarm condition.
• A diagnostic message is generated.
• The background lighting changes to red.
A0013962
Warning
Measurement is resumed. The signal outputs and totalizers are not affected. A diagnostic
message is generated.
Diagnostic information
The fault can be identified using the diagnostic information. The short text helps you by
providing information about the fault. In addition, the corresponding symbol for the
diagnostic behavior is displayed in front of the diagnostic information on the local display.
Diagnostic information
Diagnostic code
Diagnostic
behavior
Status signal
Diagnostic
number
Short text
↓ ↓ ↓
Example
A0013962 A0013958
441 Curr.output 1
NAMUR
NE 107
3-digit number
Operating elements
Key Meaning
A0013970
Plus key
In a menu, submenu
Opens the message about the remedial measures.
A0013952
Enter key
In a menu, submenu
Opens the operating menu.