Endress+Hauser Proline Promag W 400 - Configuring the Local Display

Proline Promag W 400 EtherNet/IP Commissioning
Endress+Hauser 83
Parameter Description User interface / Selection /
User entry
Factory setting
IP address IP address of the Web server of the
measuring device.
4 octet: 0 to 255 (in the
particular octet)
192.168.1.212
Subnet mask Displays the subnet mask. 4 octet: 0 to 255 (in the
particular octet)
255.255.255.0
Default gateway Displays the default gateway. 4 octet: 0 to 255 (in the
particular octet)
0.0.0.0
10.6.4 Configuring the local display
The Display wizard guides you systematically through all the parameters that can
configured for configuring the local display.
Navigation
"Setup" menu → Display
Structure of the wizard
Formatdisplay
Value1display
0%bargraph
value1
100%bargraph
value1
Value2display
Value3display
0%bargraph
value3
100%bargraph
value3
Value4display
Endofwizard
A0013797-EN
 24 "Display" wizard in the "Setup" menu