Endress+Hauser Proline Promag W 400 - Configuring the Communication; Interface

Commissioning Proline Promag W 400 EtherNet/IP
82 Endress+Hauser
Parameter Description Selection Factory setting
Mass unit Select mass unit.
Result
The selected unit is taken from: Mass flow
unit parameter
Unit choose list Country-specific:
• kg
• lb
Density unit Select density unit.
Result
The selected unit applies for:
• Output
• Simulation process variable
• Density adjustment (in Expert menu)
Unit choose list Country-specific:
• kg/l
• lb/ft³
10.6.3 Configuring the communication interface
The Communication submenu guides you systematically through all the parameters that
have to be configured for selecting and setting the communication interface.
Navigation
"Setup" menu → Communication
‣
Communication
MAC address
Default network settings
DHCP client
IP address
Subnet mask
Default gateway
Parameter overview with brief description
Parameter Description User interface / Selection /
User entry
Factory setting
MAC address Displays the MAC address of the measuring
device.

MAC = Media Access Control
Unique 12-digit character
string comprising letters and
numbers, e.g.:
00:07:05:10:01:5F
Each measuring device is given
an individual address.
Default network settings Select whether to restore network settings. • Off
• On
Off
DHCP client Select to activate/deactivate DHCP client
functionality.
Result
If the web server's DHCP client functionality
is activated, the IP address, subnet mask and
default gateway are automatically set.

Identification is via the MAC address
of the measuring device.
• Off
• On
On