Endress+Hauser Proline Promag W 400 - Page 81

Proline Promag W 400 EtherNet/IP Commissioning
Endress+Hauser 81
‣
System units
Volume flow unit
Volume unit
Conductivity unit
Temperature unit
Mass flow unit
Mass unit
Density unit
Corrected volume flow unit
Corrected volume unit
Parameter overview with brief description
Parameter Description Selection Factory setting
Volume flow unit Select volume flow unit.
Result
The selected unit applies for:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list Country-specific:
• l/h
• gal/min (us)
Volume unit Select volume unit.
Result
The selected unit is taken from: Volume
flow unit parameter
Unit choose list Country-specific:
• l
• gal (us)
Conductivity unit Select conductivity unit.
Result
The selected unit applies for:
Simulation process variable
Unit choose list µS/cm
Temperature unit Select temperature unit.
Result
The selected unit applies for:
• Output
• Reference temperature
• Simulation process variable
Unit choose list Country-specific:
• °C (Celsius)
• °F (Fahrenheit)
Mass flow unit Select mass flow unit.
Result
The selected unit applies for:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list Country-specific:
• kg/h
• lb/min