Endress+Hauser Proline Promag W 400 - 12.10 Diagnostic List; 12.11 Event Logbook; 12.11.1 Event History

Proline Promag W 400 EtherNet/IP Diagnostics and troubleshooting
Endress+Hauser 117
Parameter overview with brief description
Parameter Prerequsite Description User interface Factory setting
Actual diagnostics 1 diagnostic event has
occurred.
Displays the current diagnostic
event along with the
diagnostic information.

If two or more messages
occur simultaneously,
the message with the
highest priority is shown
on the display.
Symbol for diagnostic
behavior, diagnostic
code and short
message.
–
Previous diagnostics 2 diagnostic events have
already occurred.
Displays the diagnostic event
that occurred prior to the
current diagnostic event along
with the diagnostic
information.
Symbol for diagnostic
behavior, diagnostic
code and short
message.
–
12.10 Diagnostic list
In the Diagnostic list submenu, up to 5 currently pending diagnostic events can be
displayed along with the related diagnostic information. If more than 5 diagnostic events
are pending, the events with the highest priority are shown on the display.
Navigation path
Diagnostics menu→Diagnostic list submenu
Diagnostics
/../Diagnoselist
Diagnostics3
Diagnostics2
F273Mainelectronic
A0014006-EN
 30 Illustrated using the example of the local display
To call up the measures to rectify a diagnostic event:
• Via local display →  110
• Via Web browser →  111
• Via "FieldCare" operating tool →  113
12.11 Event logbook
12.11.1 Event history
A chronological overview of the event messages that have occurred is provided in the
Events list submenu.
Navigation path
"Diagnostics" menu → Event logbook → Events list
F
I1091Config.change
I1157Mem.err.ev.list
F311Electr.failure
/../Eventlist
0d01h19m10s
A0014008-EN
 31 Illustrated using the example of the local display