Endress+Hauser Proline Promag W 400 - System Integration; Integrating the Measuring Device in the System

System integration Proline Promag W 400 EtherNet/IP
70 Endress+Hauser
9 System integration
9.1 Overview of device description files
9.1.1 Current version data for the device
Firmware version 01.01.zz • On the title page of the Operating instructions
• On transmitter nameplate →  13
• Parameter firmware version
Diagnostics → Device info→ Firmware version
Release date of firmware version 05.2014 ---
Manufacturer ID 0x49E Manufacturer ID parameter
Diagnostics → Device info→ Manufacturer ID
Device type ID 0x1047 Device type parameter
Diagnostics → Device info → Device type
Device revision • Major revision
2
• Minor
revision 1
• On transmitter nameplate →  13
• Device revision parameter
Diagnostics → Device info → Device revision
Device profile Generic device (product type: 0x2B)
9.1.2 Operating tools
Operating tool via
Service interface (CDI)
Sources for obtaining device descriptions
FieldCare • www.endress.com → Download Area
• CD–ROM (contact Endress+Hauser)
• DVD (contact Endress+Hauser)
9.2 Overview of system files
System files Version Description How to acquire
Electronic Data
Sheet (EDS
system file)
2.1 Certified in accordance with the
following ODVA guidelines:
• Conformance test
• Performance test
• PlugFest
Embedded EDS Support (File Object
0x37)
• www.endress.com → Download
Area
• EDS system file integrated in the
device: can be downloaded via
the Web browser →  66
Add-on Profile
Level 3
• Major revision
2
• Minor
revision 1
System file for "RSLogix 5000"
software (Rockwell Automation)
www.endress.com → Download
Area
9.3 Integrating the measuring device in the system
A detailed description of how to integrate the device into an automation system (e.g.
from Rockwell Automation) is available as a separate document: www.endress.com →
Select country → Automation → Digital Communication → Feldbus device
integration → EtherNet/IP
For information on the protocol-specific data of EtherNet/IP