Endress+Hauser Proline Promag W 400 - Function Range of Configuration Management Parameter

Proline Promag W 400 EtherNet/IP Commissioning
Endress+Hauser 95
Navigation
"Setup" menu → Advanced setup → Configuration backup display
‣
Configuration backup display
Operating time
Last backup
Configuration management
Comparison result
Parameter overview with brief description
Parameter Prerequsite Description User interface /
Selection
Factory setting
Operating time – Indicates how long the device
has been in operation.
Days (d), hours (h),
minutes (m), seconds
(s)
–
Last backup – Indicates when the last data
backup was saved to the
display module.
Days (d), hours (h),
minutes (m), seconds
(s)
–
Configuration management A local display is provided. Select action for managing the
device data in the display
module.
• Cancel
• Execute backup
• Restore
• Duplicate
• Compare
• Clear backup data
Cancel
Comparison result – Comparison between present
device data and display
backup.
• Settings identical
• Settings not
identical
• No backup
available
• Backup settings
corrupt
• Check not done
• Dataset
incompatible
Check not done
10.8.1 Function range of "Configuration management" parameter
Options Description
Execute backup The current device configuration is backed up from the integrated HistoROM to the
device's display module. The backup copy includes the transmitter data of the
device.
Restore The last backup copy of the device configuration is restored from the display
module to the device's integrated HistoROM. The backup copy includes the
transmitter data of the device.
Duplicate The transmitter configuration from another device is duplicated to the device using
the display module.