EasyManua.ls Logo

ENSONIQ DP/4 - Page 104

ENSONIQ DP/4
212 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
88
Section 4 - Algorithms
13 - Noise Gate On Above Range: -96 to +00 dB
This parameter sets the
upper
threshold level
at
which the noise gate passes
audio
. This
higher
second threshold
prevents
false
"tum
ons."
14 - Gate Release Time
Range: 1
ms
to 10.0s
This parameter sets
the
amount
of time after
the
signal has elapsed for the noise gate to
shut
down. For a longer sustain, set this
parameter
higher.
15 - Speaker High Pass Cutoff
Range: 4 to 1000 Hz
This
parameter
filters
out
the
low
frequencies of the
main
amp
prior
to
the
speaker
. The higher
the value, the less
low
frequencies
pass
through.
16 - OutEQ1 Fc
Range: 100 to 9999 Hz
This
parameter
determines the filter center frequency of the parametric in
the
main
amp
stage.
Higher
values
have
a brighter
sound
.
17 - OutEQ1 Gain
Range: -48 to +24 dB
This parameter adjusts the
amount
of boost
or
cut
applied to the
main
amp
parametric.
18-0utEQ1
Q
Range:
01
to 18
This
parameter
determines the
width
of the resonant
peak
at
the filter center. While
the
Filter
center parameter determines
where
(at
what
frequency) this
peak
will occur,
the
Q setting
controls the presence of the peak.
19 - OutEQ2 Fc
Range: 100 to 9999 Hz
This
parameter
determines the filter center frequency of the second parametric
in
the
main
amp
stage. Higher values
have
a brighter sound.
20 - OutEQ2 Gain
Range: -48 to +24 dB
This
parameter
adjusts the
amount
of boost
or
cut
applied to the second
main
amp
parametric.
21-0utEQ2
Q
Range:
01
to 18
This
parameter
determines the
width
of the
resonant
peak
of the
second
filter center.
22 - Speaker Low Pass Cutoff
Range: 2.0 to 16.0 KHz
This
parameter
filters
out
the
high
frequencies of the speaker. The
higher
the value,
the
less high
frequencies
pass
through. True speaker emulations are
provided
as
separate
algorithms.
23 - Mod1 Source
24 -
Mod1
Destination
25 - Mod1 Param Range Min
26 -
Mod1
Param Range Max
27 - Mod2
Source
28 - Mod2 Destination
29 - Mod2 Param Range Min
30 - Mod2 Param Range Max
See
the
descriptions
under
the
Algorithm
Modulators
in
the
beginning
of this section.
ENSONIQ DP/4 Musician's Manual

Table of Contents

Other manuals for ENSONIQ DP/4

Related product manuals