ENSONIQ DP/4 Musician's Manual

Secti on 7 - Storage
Section 7 - Storage
The storage functions on the DP / 4 in Edit mode enable you to:
• copy lU, 2U, 4U, or Config Presets internally to other locations,
• write (save) edited preset information, and
• transmit dumps via MIDI system exclusive messages.
In addition you can manually transcribe preset information using the provided Preset Parameter
Worksheet.
Internal Storage
The Preset Memory Protect Switch
Before you can copy or write presets the Preset Memory Protect switch needs to be set to the
"Off" position .
If it is not set to "Off" before trying to write or copy a preset, the display will read "MEMORY
PROTECTED."
The DP / 4 defaults to this setting so that you don't accidentally erase any
previously saved presets.
To
set the Preset Memory Protect Switch to the "Off" position:
1. Press the System. MIDI button, then
2 using the Left and Right Arrow buttons, scroll until the display shows:
Preset MeMOry
PrQtect=On
3. If the word "On" is flashing, move the Data Entry Knob counterclockwise to the "Off"
position. If the word "Off" is flashing, RAM preset data can be changed.
4. Once this switch has been set to the "Off" position, you can save your preset. Press the Edit
button to return to the Edit mode. Your newly edited preset should still be intact and ready
to save.
Tip:
There is a quick way to get to this page. The System. MIDI parameters are
divided into sub-groups. By pressing the System. MIDI button several times, you can
quickly scroll through these sub-groups. Parameter 52 is the first page of one of these
sub -groups.
ENSONIQ DP/4 Musician's Manual
155

ENSONIQ DP/4 Specifications

General

Brand	ENSONIQ
Model	DP/4
Category	Recording Equipment
Language	English