Section 4 - Algorithms
SPEAKER CABINET
00
-
Speaker
Cabinet
simulates the
warm
sound
of
an
opened back
speaker
cabinet.
Speaker
Cabinet is fabulous for a guitar, bass
or
any other stringed instrument,
and
will find
much
use
in
the
studio
when
recording
directly to the console. This algorithm contains
the
resonances
and
the
nonlinearity
of
a
real
musical
instrument speaker.
Be
careful
not
to
overdrive
this
speaker
cabinet
with
VCF-Distortion;
tum
down
the volume there
and
make
up
for
it
with
the
output
gain
here
.
For a
brighter
speaker
emulation, try using Tunable Speaker.
The
parameters
available for this algorithm are:
01-Mix
02-Volume
See the descriptions
under
the Mix
and
Volume Parameters,
in
the
beginning
of
this section.
03 - Speaker Output Gain Range: -48 to +24
dB
Since
speaker
cabinets
are
"lossy,"
output
gain is required to compensate losses
in
perceived
volume. Setting
this
gain
too
high
will cause clipping of the
output
signal.
04 -
Mod1
Source
05
-
Mod1
Destination
06 -
Mod1
Param Range Min
07 -
Mod1
Param Range Max
08 - Mod2 Source
09
- Mod2 Destination
10
- Mod2 Param Range Min
11
- Mod2 Param Range Max
See the descriptions
under
the Algorithm Modulators earlier
in
this section.
ENSONIQ DP/4 Musician's Manual
89
To Next Page
Loading...
Need help?
General
